| Air Cond Compressor Oil |
|
w/o Rear AC |
9.00 OZS. |
0.26 L |
PAG 46 |
|
S |
| Air Cond Compressor Oil |
|
w/Rear A/C |
13.00 OZS. |
0.38 L |
PAG 46 |
|
S |
| Air Cond Refrigerant |
Gas |
w/Auxiliary Air Cond |
3.38 LBS. |
1.53 KG |
R-134a |
|
S |
| Air Cond Refrigerant |
Gas |
w/o Auxiliary Air Cond |
1.88 LBS. |
0.85 KG |
R-134a |
|
S |
| Automatic Transmission Fluid |
Trans Mfr CD 4R75W |
|
13.90 QTS. |
13.15 L |
MOTORCRAFT Automatic Transmission Fluid MERCON V |
MERCON, MERCON V and MERCON SP are not interchangeable. DO NOT mix MERCON, MERCON V and MERCON SP.
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. |
S |
| Brake Fluid |
|
|
N/A |
N/A |
MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid |
Fill to line on reservoir. |
S |
| Differential Gear Oil |
|
Rear,Dana Conventional Axles,M60,M248 |
6.30 PTS. |
2.98 L |
SAE 80W-90 Premium Rear Axle Gear Oil |
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Rear,Limited Slip Differential,M60,M248 |
6.30 PTS. |
2.98 L |
SAE 90 Hypoid Gear Oil |
Visteon TRAC-LOK axles require 4 oz. (118ml) of Additive Friction Modifier XL-3 or equivalent. Dana Limited-Slip axles (E250/350-450-550) require 8 oz. (237 ml) of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A).
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Rear,Limited Slip Differential,M70FF,M267FF |
6.80 PTS. |
3.21 L |
SAE 90 Hypoid Gear Oil |
Visteon TRAC-LOK axles require 4 oz. (118ml) of Additive Friction Modifier XL-3 or equivalent. Dana Limited-Slip axles (E250/350-450-550) require 8 oz. (237 ml) of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A).
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Differential Gear Oil |
|
Rear,Visteon 8.8"/9.75",Conventional & Traction-Lok |
5.50 PTS. |
2.6 L |
SAE 75W-140 Synthetic Rear Axle Gear Oil |
If the vehicle's rear axle is filled with a synthetic lubricant it is considered lubricated for life. Axle lubricant quantities should not need to be checked unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water.
Visteon TRAC-LOK axles require 4 oz. (118ml) of Additive Friction Modifier XL-3 or equivalent. Dana Limited-Slip axles (E250/350-450-550) require 8 oz. (237 ml) of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A).
Fill to 1/4" to 9/16" below bottom of fill hole. |
S |
| Engine Coolant |
5.4L Eng |
w/Aux Rear Heater |
30.80 QTS. |
29.14 L |
FORD Premium Gold Engine Coolant |
Add the coolant type originally equipped in the vehicle. |
S |
| Engine Coolant |
5.4L Eng |
w/o Aux Rear Heater |
28.80 QTS. |
27.25 L |
FORD Premium Gold Engine Coolant |
Add the coolant type originally equipped in the vehicle. |
S |
| Engine Oil |
Gas |
|
6.00 QTS. |
5.67 L |
SAE 5W-20 Premium Synthetic Blend Motor Oil |
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. |
S |
| Fuel Tank |
Gas |
|
37.00 GALS. |
140.06 L |
|
|
S |
| Power Steering Fluid |
|
|
N/A |
N/A |
MOTORCRAFT Automatic Transmission Fluid MERCON |
Fill to line on reservoir. |
S |
| Windshield Washer Fluid |
|
|
4.20 QTS. |
3.97 L |
MOTORCRAFT Premium Windshield Washer Concentrate Fluid |
Follow the Manufacturer's Instructions for the mixture ratio. |
S |