Anti-Theft (Pats) DTCS
POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | DTC Caused By | Perform Test |
|---|---|---|---|
| B1213 | Anti-Theft Number of Programmed Keys Is Below Minimum | PCM | GO to PINPOINT TEST F . |
| B1342 | ECU Defective (EEPROM in PCM not working) | PCM | INSTALL a new PCM. REFER to ELECTRONIC ENGINE CONTROLS . |
| B1600 | PATS Ignition Key Transponder Signal Is Not Received | PCM | GO to PINPOINT TEST B . |
| B1601 | PATS Received Incorrect Key-Code From Ignition Key Transponder | PCM | GO to PINPOINT TEST C . |
| B1602 | PATS Received Invalid Format of Key-Code From Ignition Key Transponder | PCM | GO to PINPOINT TEST D . |
| B1681 | PATS Transceiver Signal Is Not Received | PCM | GO to PINPOINT TEST E . |
| B2103 | Antenna Not Connected | PCM | 30 to Pinpoint Test A . |
| B2431 | Key Program Failure (Defective Key or Transceiver) | PCM | VERIFY if using the correct PATS key; if the PATS key defective, USE a new key for programming. |