LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Crown Victoria Police Interceptor >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System >> Disassembly And Assembly Of Subassemblies >> Piston >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly And Assembly Of Subassemblies: Piston: Assembly

    NOTE: Connecting rod must be installed into piston with identification markings toward front.
  1. Position the connecting rod in the piston.
    2. Fig 1: Locating Piston & Connecting Rod Identification Marks
    GF0000360Courtesy of FORD MOTOR CO.
    NOTE: Lubricate the piston pin and retainers with clean engine oil.
  2. Install the piston pin and the 2 piston pin retainers.
    3. NOTE: Lubricate all the piston rings and piston oil control spacer with clean engine oil.
  3. Install the lower piston oil control segment ring.
  4. Install the piston oil control spacer.
  5. Install the upper piston oil control segment ring.
  6. Install the lower piston compression ring.
  7. Install the upper piston compression ring.
scientia non olet · About LEMON Manuals