Crankshaft, Engine

Crankshaft
Main bearing journal
Diameter 67.482-67.504 mm (2.6568-2.6576 inch)
Maximum taper (straightness) 0.004 mm (0.0002 inch)
Maximum out-of-round 0.0075 mm (0.0003 inch) between cross sections
Journal-to-cylinder block clearance 0.048-0.024 mm (0.0019-0.0009 inch)
Connecting rod journal
Diameter 53.003-52.983 mm (2.0867-2.0859 inch)
Maximum taper 0.004 mm (0.0002 inch)
Maximum out-of-round 0.0075 mm (0.0003 inch) between cross sections
Maximum end play 0.075-0.377 mm (0.0030-0.0148 inch)