Lower Intake Manifold: Installation
- Using new intake manifold and thermostat housing gaskets, install the lower intake manifold and the 10 bolts.
- Tighten in the sequence shown to 10 Nm (89 lb-in).
Courtesy of FORD MOTOR CO.
- Install the 3 thermostat housing-to-lower intake manifold bolts.
- Tighten to 10 Nm (89 lb-in).
- Install the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING
.
- Install the fuel rail. For additional information, refer to FUEL CHARGING AND CONTROLS
.
- Fill and bleed the cooling system. For additional information, refer to ENGINE COOLING
.