LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Edge SE, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnostic Tests >> Output State Control (OSC) Mode >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output State Control (OSC) Mode: Procedure

NOTE: Retrieve Continuous Codes and carry out a KOEO and KOER On-Demand Self Test before using any OSC. Any DTCs related to the transmission range (TR) sensor, the output shaft speed (OSS) sensor or the turbine shaft speed (TSS) sensor must be fixed or the PCM will not allow the OSC to operate.

OSC is used to test various transaxle components and functions when the vehicle is either in the service bay or being driven on the road. Specific vehicle conditions are required for OSC to control each specific function or component. The following will describe which transaxle functions and components OSC may control and the specific vehicle conditions necessary for its operation.

scientia non olet · About LEMON Manuals