LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Edge SE, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Solenoid Body Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Solenoid Body Assembly: Assembly

  1. Install a new solenoid body assembly electrical connector seal.
    2. Fig 1: Identifying Solenoid Body Assembly Electrical Connector Seal
    GF0031835Courtesy of FORD MOTOR CO.
    CAUTION: Do not handle the solenoid body in the lead frame area or by the screens of the solenoid body filter or damage to the solenoid body can occur.
    CAUTION: Use care not to break the alignment tabs when installing the solenoid body filter. Damage to the transaxle will occur if the solenoid body is not correctly aligned.
    CAUTION: Make sure that the filter passage areas are clean of foreign material before installing the filter. Damage to the transaxle will occur if the filter passages are not clean.
  2. Install a new solenoid body filter assembly by pushing it straight down on to the alignment tabs.
    3. Fig 2: Identifying Solenoid Body Filter Assembly
    GF0031652Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals