Solenoid Body Assembly: Disassembly
- Remove the solenoid body filter assembly by pulling it straight up from the alignment tabs. Discard the filter.
- Remove and discard the solenoid body assembly electrical connector seal.
- Clean and inspect the solenoid body assembly for damage and replace if necessary.
CAUTION:
The solenoid body should be handled with care, damage to the solenoid body may occur.
CAUTION:
Do not handle the solenoid body in the lead frame area or by the screens of the solenoid body filter or damage to the solenoid body can occur.
CAUTION:
Use care not to break the alignment tabs when installing the solenoid body filter. Damage to the transaxle will occur if the solenoid body is not correctly aligned.