LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Edge SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1220 (Climate Control) >> Removal And Installation >> Plenum Chamber >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Disconnect the plenum chamber vacuum harness connector.
  3. Disconnect the vacuum hose.
    4. Fig 1: Vacuum Connector
    GF0012735Courtesy of FORD MOTOR CO.
  4. Remove the 2 plenum chamber screws.
  5. Remove the plenum chamber.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals