EMTC Module (Climate Control Module)

The EMTC module integrates the temperature control, airflow mode selection, A/C request button, recirculated air request button and rear defog switch into a single unit.

The temperature control selector setting determines air temperature. Movement of the temperature display from COOL (blue) to WARM (red) causes a corresponding movement of the temperature blend door and determines the discharge air temperature that the air distribution system will maintain. The temperature control selector is an integral part of the EMTC module and cannot be installed separately. The temperature selector knob is removable and can be separately replaced.

The airflow mode setting determines air discharge location. Movement of the airflow mode selector causes a corresponding movement of the airflow mode doors and determines the air discharge location. The airflow mode selector is an integral part of the EMTC module and cannot be installed separately. The airflow mode selector knob is removable and can be separately replaced.

The A/C request button determines A/C compressor operation, except when the airflow mode selector is in the OFF, MAX A/C or DEFROST mode. The A/C request button is an integral part of the EMTC module and cannot be installed separately.

The recirculated air request button can select recirculated air in any mode except DEFROST, and fresh air in any mode except MAX A/C or OFF. The recirculated air request button is an integral part of the EMTC module and cannot be installed separately.

The rear defog button signals activation of the heated backlight. The rear defog button is an integral part of the EMTC module and cannot be installed separately.