System Specifications
Crankshaft Pulley BoltDo not reuse the crankshaft pulley bolt.
First pass 100 Nm (74 ft. lbs.)
Final pass tighten 90° (1/4 turn)
Engine Front Cover Bolts
8 mm bolts 10 Nm (89 inch lbs.)
13 mm bolts 48 Nm (35 ft. lbs.)
Do not reuse the crankshaft pulley bolt.
First pass 100 Nm (74 ft. lbs.)
Final pass tighten 90° (1/4 turn)
Engine Front Cover Bolts
8 mm bolts 10 Nm (89 inch lbs.)
13 mm bolts 48 Nm (35 ft. lbs.)