- The safety belt warning indicator does not operate
|
- Burned-out lamp/LED
- Circuitry
- Instrument cluster (IC)
- Restraint control module
|
|
- The safety belt warning chime does not operate
|
- Safety belt switch
- IC module
- Restraint control module
- Circuitry
|
|
- Excessive pressure on the occupant during normal wear, the webbing cannot be extracted, excessive slack in webbing does not retract
|
- Front safety belt retractor and tongue
- Rear safety belt retractor and tongue
|
- CARRY OUT the component Functional Test in this article. INSTALL a new retractor if necessary.
|
- The Belt-Minder® feature is inoperative
|
- Belt-Minder® feature is deactivated
- Circuitry
|
- REFER to WARNING DEVICES
article or the Seating and Safety Restraints section of the Owner's Literature to activate the Belt-Minder® feature. If the Belt-Minder® is activated, REFER to WARNING DEVICES
article to diagnose.
|