LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Expedition 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Low/Reverse Clutch Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Low/Reverse Clutch Assembly: Disassembly

NOTE: The low/reverse clutch plates are installed in the case during the assembly procedure.
  1. Remove the thrust bearing on the center support.
    2. Fig 1: Locating Thrust Bearing On Center Support
    GF0022784Courtesy of FORD MOTOR CO.
  2. Using the special tool, remove the retaining ring.
    3. Fig 2: Identifying Special Tool
    GF0022785Courtesy of FORD MOTOR CO.
  3. Remove the low/reverse clutch return spring.
    4. Fig 3: Locating Low/Reverse Clutch Return Spring
    GF0022786Courtesy of FORD MOTOR CO.
  4. Remove the low/reverse clutch piston from the low/reverse clutch drum.
    5. Fig 4: Locating Low/Reverse Clutch Piston
    GF0022787Courtesy of FORD MOTOR CO.
  5. Remove and discard the low/reverse outer piston O-ring seals.
    6. Fig 5: Locating Low/Reverse Outer Piston O-Ring Seals
    GF0022667Courtesy of FORD MOTOR CO.
  6. Remove and discard the low/reverse drum O-ring seals.
    7. Fig 6: Locating Low/Reverse Drum O-Ring Seals
    GF0022668Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals