Anti-Theft - Pats DTCS
POWERTRAIN CONTROL MODULE (PCM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1232 | Transceiver Failure | There has been a PATS transceiver antenna failure. Go to Pinpoint Test A . |
| B1600 | PATS Ignition Key Transponder Signal is Not Received | No PATS key has been read by the PCM. Go to Pinpoint Test B . |
| B1601 | PATS Received Incorrect Key-Code From Ignition Key Transponder | There is an unprogrammed PATS key. Go to Pinpoint Test C . |
| B1602 | PATS Received Invalid Format of Key-Code From Ignition Key Transponder | Only a partial PATS key was read. Go to Pinpoint Test D . |
| B1681 | PATS Transceiver Module Signal is Not Received | The PCM did not receive the PATS transceiver signal. Go to Pinpoint Test E . |
| B2103 | Antenna Not Connected | There has been a PATS transceiver antenna failure. Go to Pinpoint Test A . |