LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Focus SE, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Ignition System >> Removal And Installation >> Ignition Coil-On-Plug >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

  1. Disconnect the ignition coil-on-plug electrical connector.
  2. Remove the bolt and the ignition coil.
    • To install, tighten to 10 Nm (89 lb-in).
  3. To install, reverse the removal procedure.
    • Apply silicone dielectric compound to the inside of the ignition coil boot.
scientia non olet · About LEMON Manuals