LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Focus SES, 2D Hatchback, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Disassembly And Assembly >> Selector Lever >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever: Disassembly

    NOTE: Use vise jaw protectors for all work to be done in the vise.
  1. Disconnect the overdrive (O/D) switch electrical connector.
    2. Fig 1: Locating Overdrive (O/D) Switch Electrical Connector
    GF0040024Courtesy of FORD MOTOR CO.
  2. Remove the selector lever knob.
    • Remove and discard the screw.
    3. Fig 2: Locating Selector Lever Knob Screw
    GF0040028Courtesy of FORD MOTOR CO.
  3. Disassemble the selector lever.
    • Pull off the tappet.
    • Unclip the bezel.
    4. Fig 3: Locating Selector Lever Tappet And Bezel Clip
    GF0040029Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals