LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Focus SES, 2D Hatchback, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Transaxle Case >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Case: Disassembly

  1. Remove the halfshaft seals (LH shown).
    2. Fig 1: Locating Halfshaft Seals
    GF0039898Courtesy of FORD MOTOR CO.
  2. Using the special tools, remove the differential case bearing cups (LH shown).
    3. Fig 2: Identifying Special Tools
    GF0039899Courtesy of FORD MOTOR CO.
  3. Using the special tools, remove the final drive input gear bearing cup.
    4. Fig 3: Identifying Special Tools
    GF0039900Courtesy of FORD MOTOR CO.
  4. Using the special tool, remove the transfer shaft gear bearing cups (LH shown).
    5. Fig 4: Identifying Special Tool
    GF0039901Courtesy of FORD MOTOR CO.
    NOTE: Note the location of the bleed hole in the funnel in relation to the bottom of the case.
    NOTE: Inspect the bleed hole for foreign material.
    NOTE: If flatness of funnel is compromised during bearing removal, install a new funnel.
  5. Remove the funnel.
    6. Fig 5: Locating Bleed Hole
    GF0039902Courtesy of FORD MOTOR CO.
  6. Rotate the transaxle 180 degrees.
  7. Using the special tools, remove the final drive input gear bearing cup.
    8. Fig 6: Identifying Special Tools
    GF0039903Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals