- Engine does not crank/the relay does click
|
- Battery
- Starter motor
- Relay
- Circuit
|
|
- Engine does not crank/the relay does not click
|
- Battery
- Open fuse
- Starter motor
- Ignition switch
- Clutch pedal position (CPP) switch (manual transaxle only)
- Circuitry
- Starter motor relay
|
|
|
|
- Battery
- Starter motor
- Circuitry
|
|
- Unusual starter motor noise
|
- Starter motor
- Flywheel ring gear
|
- CHECK flywheel ring gear. REFER to ENGINE SYSTEM - GENERAL INFORMATION
article.
- INSPECT the starter motor for alignment and cracked case. Make sure the mounting bolts are tightened. If necessary, INSTALL a new starter motor. REFER to Starter Motor .
|
- The starter spins but the engine does not crank
|
|
- INSPECT the flywheel ring gear for missing teeth. CHECK the starter motor for correct mounting. If concern persists, INSTALL a new starter motor. REFER to Starter Motor .
|