LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Focus ST >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Servicing >> Engine Mount >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

  1. Remove the expansion tank bolt.
    • To install, tighten to 10 Nm (89 lb-in).
    2. Fig 1: Locating Expansion Tank Bolt
    GF0039286Courtesy of FORD MOTOR CO.
  2. Lift the coolant expansion tank out of the retainer and position it aside.
    3. Fig 2: Removing Coolant Expansion Tank
    GF0039287Courtesy of FORD MOTOR CO.
  3. Install the special tool.
    4. Fig 3: Identifying Special Tool (303-F072)
    GF0039288Courtesy of FORD MOTOR CO.
  4. Remove the 2 engine mount nuts.
    • To install, tighten to 90 Nm (66 lb-ft).
  5. Remove the 3 bolts and the engine mount.
    • To install, tighten to 48 Nm (35 lb-ft).
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals