Anti-Lock Brake System
- Specifications
- Description And Operation
- Diagnostic Tests
- Anti-Lock Control
- Notes
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: DTC C1288 - Pressure Transducer Main/Primary Input Circuit Failure
- Pinpoint Test B: DTC C1093 - Traction Control Disable Switch Circuit Failure/The Traction Control System Cannot Be Disabled
- Pinpoint Test C: DTCs C1095 and C1096 - ABS Hydraulic Pump Motor Circuit Failure/Open
- Pinpoint Test D: DTCs C1145, C1155, C1165 and C1175 - Wheel Speed Sensor Input Circuit Failure
- Pinpoint Test E: DTCs C1222, C1233, C1234, C1235 and C1236 - Wheel Speed Sensor Input Signal Missing/Mismatch
- Pinpoint Test F: DTCs C1277 and C1278 - Steering Wheel Angle 1 and 2 Circuit Failure/Faulted
- Pinpoint Test G: DTCs C1279, C1280, C1281 and C1282 - Sensor Cluster Faults
- Pinpoint Test H: DTC C1285 - Booster Solenoid Circuit Failure, DTC C1286 - Booster Mechanical Failure
- Pinpoint Test I: DTC C1287 - Brake Booster Pedal Force Switch Circuit Failure
- Pinpoint Test J: The Traction Control Warning Indicator Is Always On
- Pinpoint Test K: DTCs B1317 and B1318- Battery Voltage High/Low
- Pinpoint Test L: DTC C1991 - Module Calibration Failure
- Pinpoint Test M: DTCs C1329, C1330, C1331, C1332, C1333, C1334, C1335, C1336, C1527, C1528, C1529, C1530 AND C1531 - Valve Solenoid Overtemp
- Normal Operation
- PINPOINT TEST M: DTCs C1329, C1330, C1331, C1332, C1333, C1334, C1335, C1336, C1527, C1528, C1529, C1530 AND C1531 - VALVE SOLENOID OVERTEMP
- Pinpoint Test N: Spongy/Soft Brake Pedal With No Warning Indicator
- Pinpoint Test O: DTC C1446 - Brake Pedal Switch Circuit Failure
- Pinpoint Test P: DTC C1730 - Reference Voltage Out of Range (+5 V)
- Removal And Installation