LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Freestar Base, 4.2 2 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Servicing >> Push Rod >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. Remove the rocker arms. For additional information, refer to Valve Train Components - Exploded View  and Rocker Arm .
    2. CAUTION: If the push rods are to be reused, they must be installed in their original location. Mark the push rods for location.
  2. Remove the push rods.
  3. Inspect the push rods. For additional information, refer to ENGINE SYSTEM - GENERAL INFORMATION article.
    4. NOTE: Lubricate the push rod with clean engine oil.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals