Anti-Lock Brake System
- Specifications
- Description And Operation
- Diagnostic Tests
- Anti-Lock Control
- Notes
- Principles of Operations
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: DTC B1484 - Brake Pedal Input Open Circuit
- Pinpoint Test B: DTC B1676, Battery Pack Voltage Out of Range
- Pinpoint Test C: DTCs C1145, C1155, C1165 and C1175 - Wheel Speed Sensor Input Circuit Failure
- Pinpoint Test D: DTC C1266 Anti-lock Brake System (ABS) Valve Power Relay Circuit Failure
- Pinpoint Test E: DTCs C1222, C1296 (LF), C1297 (RF), C1298 (LR) and C1299 (RR) - Wheel Speed Sensor Fault
- Pinpoint Test F: DTC C1300 - ABS Hydraulic Pump Motor Circuit Failure
- Pinpoint Test G: The Yellow Anti-lock Brake System (ABS) Warning Indicator is Always On
- Pinpoint Test H: Spongy Brake Pedal with No Warning Indicator
- Pinpoint Test I: Poor Vehicle Tracking During Anti-lock Function
- Pinpoint Test J: The Traction Control System Cannot Be Disabled
- Pinpoint Test K: The Traction Control Switch Indicator is Never/Always On
- Anti-Lock Control
- Removal And Installation