Selector Lever Cable Adjustment

6-speed transaxle 

1. Vehicles equipped with a 3.5L engine, remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING - 3.5L .
2. Disconnect the selector lever cable end from the manual control lever.
Fig 1: Locating Selector Lever Cable End
Courtesy of FORD MOTOR CO.
3. Place the manual control lever in DRIVE.
   1. Place the manual control lever in PARK.
   2. Move the manual control lever counterclockwise 3 detents to the DRIVE position.
Fig 2: Moving Manual Control Lever Counterclockwise
Courtesy of FORD MOTOR CO.

FNR5 transaxle 

4. Disconnect the selector lever cable end from the manual control lever.
Fig 3: Locating Selector Lever Cable End
Courtesy of FORD MOTOR CO.
NOTE: Transaxle shown removed for clarity.
5. Place the manual control lever in NEUTRAL.
   1. Place the manual control lever in PARK.
   2. Move the manual control lever clockwise 3 detents to the DRIVE position.
Fig 4: Moving Manual Control Lever Clockwise
Courtesy of FORD MOTOR CO.

All vehicles 

6. Place the range selector lever in DRIVE.
Fig 5: Locating Gear Selector Lever
Courtesy of FORD MOTOR CO.
7. Unlock the adjuster by sliding the locking tab over.
Fig 6: Sliding Locking Tab Over
Courtesy of FORD MOTOR CO.
8. Slide the selector lever cable end forward or backward to align it with the manual control lever.
Fig 7: Sliding Cable End
Courtesy of FORD MOTOR CO.
NOTE: FNR5 selector lever cable end shown, 6-speed transaxle similar.
9. With the adjuster locking tab released connect the selector lever cable end to the manual control lever.
Fig 8: Locating FNR5 Selector Lever Cable
Courtesy of FORD MOTOR CO.
NOTE: FNR5 selector lever cable end shown, 6-speed transaxle similar.
10. Slide the release tab back to lock the adjuster.
Fig 9: Releasing Tab Back To Lock Adjuster
Courtesy of FORD MOTOR CO.
11. For vehicles equipped with a 3.5L engine, install the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING - 3.5L .
12. Verify that the vehicle starts in PARK and NEUTRAL only and that the reverse lamps illuminate in REVERSE.