LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Fusion S, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever: Removal

  1. Remove the center console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the selector lever cable end from the selector lever.
    3. Fig 1: Locating Selector Lever Cable End
    GF0029897Courtesy of FORD MOTOR CO.
  3. Release the tab on the selector lever cable and remove it from the selector lever housing.
    4. Fig 2: Locating Selector Lever Cable Locking Tabs
    GF0029898Courtesy of FORD MOTOR CO.
  4. Disconnect the electrical connector.
    5. Fig 3: Locating Electrical Connector
    GF0029899Courtesy of FORD MOTOR CO.
  5. Remove the 4 nuts and remove the selector lever.
    6. Fig 4: Locating Nuts
    GF0029900Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals