LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever: Installation

  1. Position the transmission selector lever housing assembly in the vehicle and install the 2 nuts and the 2 screws.
    • Tighten to 9 Nm (80 lb-in).
    2. Fig 1: Locating Transmission Selector Lever Nuts And Screws (2 Of 2)
    GF0015712Courtesy of FORD MOTOR CO.
  2. Connect the selector lever electrical connector.
    3. Fig 2: Locating Selector Lever Electrical Connector
    GF0015711Courtesy of FORD MOTOR CO.
  3. Connect the power point electrical connector and install the console.
    4. Fig 3: Locating Power Point Electrical Connector
    GF0015710Courtesy of FORD MOTOR CO.
  4. Install the 2 screws into the front of the console.
    5. Fig 4: Locating Screws From Front Of Console
    GF0015709Courtesy of FORD MOTOR CO.
  5. Install the 2 screws into the bottom of the console bin.
    6. Fig 5: Locating Screws In Bottom Of Console Bin
    GF0015708Courtesy of FORD MOTOR CO.
  6. Install the driver and passenger side center console kick panels.
    7. Fig 6: Locating Driver And Passenger Center Console Kick Panels
    GF0014992Courtesy of FORD MOTOR CO.
  7. Install the center console top finish panel and the 2 screws.
    8. Fig 7: Locating Center Console Top Finish Panel Screws
    GF0014991Courtesy of FORD MOTOR CO.
  8. Install the center console selector lever trim.
    9. Fig 8: Locating Console Shifter Bezel
    GF0014990Courtesy of FORD MOTOR CO.
    NOTE: It is necessary to install a new plastic clip prior to installation.
  9. Install the selector lever cable into the bracket.
    10. Fig 9: Locating Selector Lever Cable From Bracket And Discard Clip
    GF0015707Courtesy of FORD MOTOR CO.
  10. Install the selector lever cable onto the selector lever and lock the selector lever cable adjustment lock.
    11. Fig 10: Locking Selector Lever Cable Adjustment Lock
    GF0015705Courtesy of FORD MOTOR CO.
  11. Verify the selector lever cable is adjusted correctly. For additional information, refer to Selector Lever Cable Adjustment .
scientia non olet · About LEMON Manuals