LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Overdrive Planetary Gears >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Overdrive Planetary Gears: Assembly

    NOTE: Thoroughly clean all parts and blow dry with moisture-free compressed air.
    NOTE: Use petroleum jelly to hold the No. 2 overdrive planetary thrust bearing in place.
  1. Install the No. 2 overdrive planetary thrust bearing.
    2. Fig 1: Locating Overdrive Planetary Thrust Bearing
    GF0015639Courtesy of FORD MOTOR CO.
  2. Install the overdrive planetary gear carrier into the center shaft and overdrive.
    3. Fig 2: Locating Overdrive Planetary Gear Carrier, Center Shaft And Overdrive
    GF0015642Courtesy of FORD MOTOR CO.
    NOTE: Make sure that the No. 12 bearing is in place in the overdrive planetary prior to installing the overdrive sun gear.
  3. Install the overdrive sun gear with the recessed gear teeth facing toward the adapter.
    4. Fig 3: Locating Overdrive Sun Gear
    GF0010270Courtesy of FORD MOTOR CO.
    NOTE: Adapter part number must not be visible after installation.
    NOTE: Inspect the sun gear for damaged or worn teeth.
  4. Install the coast clutch-to-overdrive carrier adapter.
    5. Fig 4: Locating Coast Clutch-To-Overdrive Carrier Adapter
    GF0015640Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals