Reverse Servo Assembly: Assembly

CAUTION: Try not to roll the seal onto the housing when installing the seal or damage to the seal may occur.

Lubricate and install a new reverse servo piston seal.

Fig 1: Locating Reverse Servo Piston Seal

Courtesy of FORD MOTOR CO.

Lubricate and install the reverse servo piston and seal assembly.

Fig 2: Locating Reverse Servo Piston

Courtesy of FORD MOTOR CO.

Install the reverse servo spring.

Fig 3: Locating Reverse Servo Spring

Courtesy of FORD MOTOR CO.

WARNING: Follow the specified procedure when using the tool to remove the servo cover. The servo and servo cover are under high spring force and can separate forcefully, which may result in serious personal injury.

NOTE: The arrow on the servo plate must be aligned evenly between any 2 slots on the cover.

Install the reverse servo plate.

Fig 4: Locating Reverse Servo Plate

Courtesy of FORD MOTOR CO.

Install the reverse servo spring and check valve.

Fig 5: Locating Reverse Servo Spring And Check Valve

Courtesy of FORD MOTOR CO.

Install the control valve spring retainer.
- Tighten to 10 Nm (89 lb-in).

Fig 6: Locating Control Valve Spring Retainer

Courtesy of FORD MOTOR CO.