LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Servicing >> Push Rod >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. Remove the rocker arms. For additional information, refer to Valve Train Components - Exploded View, Rocker Arm, Push Rod, Valve Seals and Hydraulic Lash Adjuster  and Rocker Arm .
    2. NOTE: Identify the location of each push rod. Each push rod must be installed in the original location.
  2. Remove the push rods.
  3. To install, reverse the removal procedure.
    • Lubricate the push rods with clean engine oil before installing.
scientia non olet · About LEMON Manuals