LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SE >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Servicing >> Transaxle Support Insulator >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Support Insulator: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the LH wheel and tire. For additional information, refer to WHEELS AND TIRES article.
  3. Place the high-lift transmission jack under the transaxle.
    4. Fig 1: Transmission Jack
    GF0020158Courtesy of FORD MOTOR CO.
  4. Remove the LH transaxle upper support insulator nut.
    5. Fig 2: Locating LH Transaxle Upper Support Insulator Nut
    GF0020159Courtesy of FORD MOTOR CO.
  5. Remove the engine and transaxle upper support bracket bolts and bracket.
    6. Fig 3: Locating Transaxle Upper Support Bracket Bolts And Bracket
    GF0020160Courtesy of FORD MOTOR CO.
  6. Remove the engine and transaxle upper support insulator bolts and insulator.
    7. Fig 4: Locating Transaxle Upper Support Insulator Bolts
    GF0020161Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals