Section 274 (Cruise Control System)
WARNING: This page is about a different car, the 2005 Mercury Sable and 2005 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Speed Control
- Notes
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- Self-Test Diagnostics
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: Flash Code 1 - With Last Switch Pressed And No Dynamic Pull Occurs At The Throttle
- Pinpoint Test B: Flash Code 2 - Brake Pedal Position (BPP) Switch Or Circuit Failure
- Pinpoint Test C: Flash Code 3 - DEACTIVATOR Switch Or Circuit Failure
- Pinpoint Test D: Flash Code 1 - Dynamic Pull Occurs At Throttle And Speed Control Inoperative
- Pinpoint Test E: The Speed Control Is Inoperative - No Flash Codes
- Pinpoint Test F: The Speed Control Switch Is Inoperative
- Pinpoint Test G: The Speed Control Indicator Lamp Is Always On
- Pinpoint Test H: The Set Speed Fluctuates
- Speed Control
- Removal And Installation