LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SEL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever Bezel >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Bezel: Removal

  1. Remove the console bezel.
    • Carefully pry the bezel from the rear and lift.
  2. Fig 1: Locating Console Bezel
    GF0020556Courtesy of FORD MOTOR CO.
  3. Remove the shift knob. For additional information, refer to Selector Lever Knob .
  4. Remove the retaining clips, then, pinching the retaining fingers, lift upward on the selector lever bezel slightly.
  5. Fig 2: Locating Retaining Clips
    GF0020557Courtesy of FORD MOTOR CO.
  6. Disconnect the selector lever bezel light bulbs and sockets.
  7. Fig 3: Selector Lever Bezel Light Bulbs & Sockets
    GF0020558Courtesy of FORD MOTOR CO.
  8. Remove the selector lever bezel.