LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SEL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Intermediate Clutch Cylinder >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intermediate Clutch Cylinder: Disassembly

  1. Remove the intermediate clutch pack.
    1. Remove the snap ring.
    2. Remove the pressure plate.
    3. Remove the clutch pack.
    4. Remove the wave spring.
    2. Fig 1: Identifying Intermediate Clutch Pack
    GF0020340Courtesy of FORD MOTOR CO.
    CAUTION: Do not fully compress the intermediate clutch spring retainer.
  2. Using the special tool, compress the intermediate clutch return spring and remove the snap ring.
    3. Fig 2: Removing Snap Ring Using Special Tool (307-015)
    GF0020341Courtesy of FORD MOTOR CO.
    NOTE: The seal is part of the piston and is repaired as an assembly.
  3. Remove the intermediate clutch balance piston assembly.
    4. Fig 3: Intermediate Clutch Balance Piston Assembly
    GF0020342Courtesy of FORD MOTOR CO.
  4. Remove the intermediate clutch return spring.
    5. Fig 4: Intermediate Clutch Return Spring
    GF0020343Courtesy of FORD MOTOR CO.
    NOTE: The seal is part of the piston and is repaired as an assembly.
  5. Remove the intermediate clutch piston.
    6. Fig 5: Intermediate Clutch Piston
    GF0020344Courtesy of FORD MOTOR CO.
  6. Remove the intermediate clutch piston inner seal.
    7. Fig 6: Intermediate Clutch Piston Inner Seal
    GF0020345Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals