LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SEL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Low-Intermediate One-Way Clutch >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Low-Intermediate One-Way Clutch: Assembly

    NOTE: Before installing, clean and inspect the low/intermediate one-way clutch rollers and cage for cracks, brinelling or scoring. Install new if necessary.
  1. Install the low/intermediate one-way clutch roller and cage. Rotate counterclockwise to lock in place.
    2. Fig 1: Low/Intermediate One-Way Clutch Roller & Cage
    GF0020390Courtesy of FORD MOTOR CO.
  2. Clean and inspect the rear sun gear assembly.
    1. Inspect the bushing.
    2. Inspect the inner race.
    3. Inspect the bearing.
    3. Fig 2: Identifying Rear Sun Gear Assembly
    GF0020391Courtesy of FORD MOTOR CO.
    NOTE: The outer splined race should rotate counterclockwise and hold clockwise.
  3. Install the low/intermediate one-way clutch outer race.
    4. Fig 3: Low/Intermediate One-Way Clutch Assembly
    GF0020388Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals