Keyless Entry Key-Pad: Testing and Inspection

Keyless Entry Keypad Code Programming

NOTE: The system only allows 1 personal code to be programmed.

NOTE: Any existing personal code does not need to be erased to program a new one.

1. Enter the permanent factory keyless entry keypad code.
2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code.
3. Within 5 seconds, enter the new 5-digit keyless entry keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code.