P064D - Internal Control Module O2 Sensor Processor Performance - Bank 1
P064D - INTERNAL CONTROL MODULE O2 SENSOR PROCESSOR PERFORMANCE - BANK 1
| Description: | The powertrain control module (PCM) monitors the application-specific integrated circuit that controls and monitors the heated oxygen sensor (HO2S). The test fails when the PCM detects an internal circuit or communication concern. | |||
| Possible Causes: |
|
|||
| Diagnostic Aids: | Internal PCM concern. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory | |
| All | Reprogram or update the calibration. Check for other DTCs and diagnose those first. Make sure to check for aftermarket performance products before installing a new PCM. Clear the DTCs, repeat the self-test. If the DTC is retrieved again, install a new PCM. Refer toFLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . | |||