Keyless Entry Key-Pad: Testing and Inspection

KEYLESS ENTRY KEYPAD CODE PROGRAMMING

1. NOTE: The permanent factory keyless entry keypad code cannot be erased.

Enter the permanent factory keyless entry keypad code.

2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases the stored customer code. The door locks lock, then unlock, confirming the code is erased. The existing code does not need to be erased to program a new customer code.
3. Within 5 seconds, enter the new 5-digit keyless entry keypad code. The door locks lock and unlock to confirm the new customer code is programmed.
4. To exit the programming mode, wait 5 seconds.