LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Fusion S, Standard >> Repair and Diagnosis >> General Information >> Identification >> Identification Codes >> Description And Operation >> Identification Codes >> Vehicle Certification (VC) Codes >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vehicle Certification (VC) Codes: Notes

Fig 1: Vehicle Certification (VC) Label Locator
GF0028151Courtesy of FORD MOTOR CO.

The upper portion of the VC label contains the manufacturer's name, the month and year of manufacture, the certification statement and the VIN. It also includes gross vehicle weight rating (GVWR). The VC label is located on the left-hand door jamb.

If a vehicle requires replacement of the VC label and is 4 years old or less, an authorized dealer must submit the VIN to their respective regional office. The regional office will submit a web form to the assembly plant for the replacement label. Once the label has been printed, a representative from the regional office will deliver the label to the dealer and witness installation on the vehicle. If a vehicle is more than 4 years old and requires a replacement label, the dealer must submit a request to the Department of Motor Vehicles.

Fig 2: VC Label Breakdown
GF0000012Courtesy of FORD MOTOR CO.
Item Description
1 Exterior paint code
2 Region code
3 Domestic special order
4 Interior trim code
5 Tape/paint stripe code
6 Radio code
7 Axle code
8 Transmission code
9 Spring code
10 Powertrain calibration information
Fig 3: Exterior Paint
GF0012995Courtesy of FORD MOTOR CO.

Exterior paint codes may be listed as a 2-part code. The first set of characters identify the primary body color. The second set of characters (if applicable) identify the vehicle accent or 2-tone body color. All colors are base coat/clear coat.

Exterior Color Codes

Fig 4: Interior Trim
GF0012996Courtesy of FORD MOTOR CO.

Interior trim codes are listed as a 2-part code. The first character identifies the interior trim type. The second character identifies the interior trim color.

Interior Trim Type

Interior Trim Color

Fig 5: Tape/Paint Stripe
GF0012997Courtesy of FORD MOTOR CO.

Tape and paint stripe codes do not apply.

Fig 6: Radio Type
GF0012998Courtesy of FORD MOTOR CO.
Fig 7: Axle Ratio Codes
GF0012999Courtesy of FORD MOTOR CO.

The axle ratios are:

Fig 8: Transmission Type
GF0013000Courtesy of FORD MOTOR CO.
Fig 9: Spring Code
GF0013001Courtesy of FORD MOTOR CO.

Spring codes are listed as a 2-part code. The first 2 characters identify the front springs. Characters 3 and 4 identify the rear springs. Front spring base part number is 5310, rear spring base part number is 5560.