Selector Lever Bezel: Removal

All vehicles 

1. Remove the selector lever bezel trim ring.
Fig 1: Identifying Selector Lever Bezel Trim Ring
Courtesy of FORD MOTOR CO.
2. Lift the armrest and remove the upper console panel.
Fig 2: Identifying Upper Console Panel
Courtesy of FORD MOTOR CO.
3. Slide the lower selector lever knob bezel downward.
Fig 3: Sliding Lower Selector Lever Knob Bezel Downward
Courtesy of FORD MOTOR CO.
4. Remove the 2 screws from the selector lever knob.
Fig 4: Identifying Screws
Courtesy of FORD MOTOR CO.

Vehicles not equipped with a transmission control (TC) switch 

5. Remove the selector lever knob and knob bezel.

All vehicles 

NOTE: Selector lever removed for clarity.
6. Release the 4 selector lever bezel tabs and position the selector lever bezel aside to gain access to the bezel light and the transmission control (TC) switch electrical connector, if equipped.
Fig 5: Identifying Tabs
Courtesy of FORD MOTOR CO.
7. Remove the selector lever bezel light from the selector lever bezel.
Fig 6: Locating Light From PRNDL Bezel
Courtesy of FORD MOTOR CO.

Vehicles equipped with a TC switch 

8. Disconnect the TC switch electrical connector, route the wiring harness out of the selector lever bezel and remove the selector lever knob and knob bezel.
Fig 7: Identifying Connector
Courtesy of FORD MOTOR CO.

All vehicles 

9. Remove the selector lever bezel.