Wheels And Tires DTCS

TIRE PRESSURE MONITORING SYSTEM (TPMS) DRIVER DOOR MODULE (DDM) DTC LIST

DTC	Description	Source	Perform Test
B106A	Pressure Sensor Range Bit Incorrect State	Driver door module (DDM)	Go to Pinpoint Test H .
B106B	Tire Pressure Sensor Low Battery (Could be set configuring new DDM)	DDM	Go to Pinpoint Test I .
B106D	Tire Pressure Monitor System (TPMS) Initiators Not Configured	DDM	DTC B106D is only present when a new DDM is installed, the DDM is incorrectly flashed or the DDM is incorrectly configured. Successfully configuring the DDM is the only way to clear this DTC. VERIFY the DDM is correctly configured. If DTC B106D is still present, REFER to MODULE CONFIGURATION article.
B2477	Module Configuration Failure/Mismatch	DDM	DTC B2477 is only present when a new DDM is installed, the DDM is incorrectly flashed or the DDM is incorrectly configured. Successfully configuring the DDM is the only way to clear this DTC. Make sure the DDM is configured correctly. If DTC B2477 is still present, REFER to MODULE CONFIGURATION article.
B2868	LF Tire Pressure Sensor Fault	DDM	DTC B2868 is only present when a new DDM is installed, the DDM is flashed or the DDM is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
B2869	RF Tire Pressure Sensor Fault	DDM	DTC B2869 is only present when a new DDM is installed, the DDM is flashed or the DDM is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
B287A	Tire Pressure System Fault	DDM	Go to Pinpoint Test G .
B2870	RR Tire Pressure Sensor Fault	DDM	DTC B2870 is only present when a new DDM is installed, the DDM is flashed or the DDM is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
B2871	LR Tire Pressure Sensor Fault	DDM	DTC B2871 is only present when a new DDM is installed, the DDM is flashed or the DDM is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
B2872	Tire Pressure Sensor Fault	DDM	NOTE: If the vehicle has been stationary for more than 30 minutes, the sensors will go into a "sleep mode" to conserve battery power. It will be necessary to wake them up so they will transmit the latest tire pressure information to the DDM. ACTIVATE the TPMS sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Activation . Go to Pinpoint Test G .
C2780	Electrical Control Unit (ECU) in Manufacturing Mode	DDM	DTC C2780 is only present when a new DDM is installed, the DDM is flashed or the DDM is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .