Four Wheel Drive (4WD) System DTCS
4X4 CONTROL MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Possible Causes | Source | Perform Test |
|---|---|---|---|---|
| B1317 | Battery Voltage High |
|
4X4 Control Module | Go to Pinpoint Test B under PINPOINT TESTS . |
| B1318 | Battery Voltage Low |
|
4X4 Control Module | CHECK smart junction box (SJB) fuses 11 (10A) and 35 (10A). If fuses are OK, go to Pinpoint Test B under PINPOINT TESTS . |
| P1635 | Tire/Axle Out of Acceptable Range |
|
4X4 Control Module | Go to Pinpoint Test G under PINPOINT TESTS . |
| P1824 | 4-Wheel Drive Clutch Relay Circuit Failure |
|
4X4 Control Module | CHECK SJB fuse 11 (10A). If the fuse is OK, go to Pinpoint Test E under PINPOINT TESTS . |
| P1825 | 4-Wheel Drive Clutch Relay Open Circuit |
|
4X4 Control Module | CHECK SJB fuses 11 (10A) and 35 (10A). If the fuses are OK, go to Pinpoint Test E under PINPOINT TESTS . |
| U0100 | Lost Communication with ECM/PCM |
|
4X4 Control Module | Go to Pinpoint Test D under PINPOINT TESTS . |
| U0121 | Lost Communication with Anti-lock Brake System (ABS) Control Module |
|
4X4 Control Module | Go to Pinpoint Test D under PINPOINT TESTS . |
| U0415 | Invalid Data Received From Anti-lock Brake System (ABS) Control Module |
|
4X4 Control Module | Go to Pinpoint Test C under PINPOINT TESTS . |