Engine Controls - Diagnostic Methods (Except Diesel & Hybrid)
- Diagnostic Methods
- Diagnostic Tools
- Scan Tool Setup and Functionality
- Vehicle Check/Preparation
- Quick Test Description
- Clear the Continuous Diagnostic Trouble Codes (DTCs) and Reset the Emission Monitors Information in the Powertrain Control Module (PCM)
- Resetting The Keep Alive Memory (KAM)
- On-Board System Readiness (OSR) Test
- Output State Control (OSC)
- Output Test Mode (OTM)
- Parameter Identification (PID)
- Freeze Frame Data
- Flash Electrically Erasable Programmable Read Only Memory (EEPROM)
- Diagnostic Monitoring Test Results - Mode 6
- On Board Diagnostic (OBD) Drive Cycle
- Intermittent Diagnostic Techniques
- Adaptive Fuel Diagnostic Trouble Code (DTC) Diagnostic Techniques
- Notes
- Obtain Freeze Frame Data
- Using the LONGFT1 and LONGFT2 (Dual Bank Engines) PIDs
- Resetting Long Term Fuel Trims
- DTCs P0171/P0174 System Too Lean Diagnostic Aids
- Air Measurement System
- Vacuum Leaks/Unmetered Air
- Insufficient Fueling
- Exhaust System Leaks
- DTCs P0172/P0175 System Too Rich Diagnostic Aids
- Fuel System
- Air Inlet System
- Base Engine