Module Configuration and Parameter Chart - Escape and Mariner

MODULE CONFIGURATION AND PARAMETER CHART - ESCAPE AND MARINER

Module	Module Address	Requires PMI	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
4X4 control module	761	No	No	No	None
ABS module	760	Yes	Yes	Stability control initialization	None
Audio Control Module (ACM) (without navigation)	727	Yes	Yes	No	Cell phone module Satellite Digital Audio Receiver System (SDARS) module
ACM (with navigation)	727	Yes	Yes	No	Destination country code
Accessory Protocol Interface Module (APIM)	7D0	Yes	Yes	No	Stereo pass-through
Front Controls Interface Module (FCIM)	7A7	No	No	No	None
Front Display Interface Module (FDIM)	7A6	Yes	Yes	No	Cell phone module SDARS module
HVAC module (dual zone)	733	No	No	No	None
HVAC module (single zone)	733	Yes	Yes	No	None
Instrument Cluster (IC)	720	Yes	Yes	No	Belt-Minder® Default language Oil life threshold Autolocks Auto-unlocking
Occupant Classification System Module (OCSM)	765	No	No	Seat weight sensor re-zero	None
Parking Aid Module (PAM)	B2	Yes	No	No	None
Power Steering Control Module (PSCM)	730	Yes	Yes	No	None
PCM	7E0	Yes	Yes	Adaptive airflow Idle speed Refueling event Fuel trim	Axle ratio Speed control Tire size Drivetrain Transmission solenoid body ID
Restraints Control Module (RCM)	737	Yes	Yes	Seat weight sensor re-zero	Driver seat Belt-Minder® Emergency call (late build) Passenger seat Belt-Minder®
SDARS module	782	Yes	Yes	No	Cell phone module
Smart Junction Box (SJB)	726	Yes	Yes	Tire Pressure Monitoring System (TPMS) sensor training	Autolamp enable Autolamp delay time Daytime Running Lamps (DRL) Fog lamps enable Lamp outage Locking horn feedback Locking light feedback Perimeter lighting feature Remote Keyless Entry (RKE) keypad enable RKE liftgate/trunk glass release feature activation RKE panic feature activation-hold