Module Communications Network
- Description And Operation
- Diagnosis And Testing
- Communications Network
- Special Tool(s)
- Principles of Operation
- Notes
- ISO 9141 Communications Network
- ISO 9141 Network Communication Fault Chart
- Medium Speed Controller Area Network (MS-CAN)
- MS-CAN Communication Fault Chart
- High Speed Controller Area Network (HS-CAN)
- HS-CAN Communication Fault Chart
- CAN Module Communication Message Chart - Escape and Mariner
- CAN Module Communication Message Chart - Hybrid
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: The PCM Does Not Respond To The Scan Tool
- Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool
- Pinpoint Test C: The 4X4 Control Module Does Not Respond To The Scan Tool
- Pinpoint Test D: The Instrument Cluster (IC) Does Not Respond To The Scan Tool
- Pinpoint Test E: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool
- Pinpoint Test F: The Occupant Classification System Module (OCSM) Does Not Respond To The Scan Tool
- Pinpoint Test G: The Power Steering Control Module (PSCM) Does Not Respond To The Scan Tool
- Pinpoint Test H: The Transmission Control Module (TCM) Does Not Respond To The Scan Tool
- Pinpoint Test I: The Battery Control Module (BCM) Does Not Respond To The Scan Tool
- Pinpoint Test J: The Smart Junction Box (SJB) Does Not Respond To The Scan Tool
- Pinpoint Test K: The Audio Control Module (ACM) Does Not Respond To The Scan Tool
- Pinpoint Test L: The HVAC Module Does Not Respond To The Scan Tool
- Pinpoint Test M: The Satellite Digital Audio Receiver System (SDARS) Module Does Not Respond To The Scan Tool
- Pinpoint Test N: The Front Display Interface Module (FDIM) Does Not Respond To The Scan Tool
- Pinpoint Test O: The Front Controls Interface Module (FCIM) Does Not Respond To The Scan Tool
- Pinpoint Test P: The Accessory Protocol Interface Module (APIM) Does Not Respond To The Scan Tool
- Pinpoint Test Q: The Parking Aid Module (PAM) Does Not Respond To The Scan Tool or No ISO 9141 network communication
- Pinpoint Test R: Intermittent No High Speed Controller Area Network (HS-CAN) Communication, Communication Can Be Intermittently Established
- Pinpoint Test S: No High Speed Controller Area Network (HS-CAN) Communication, All Modules Are Not Responding
- Pinpoint Test T: Intermittent No Medium Speed Controller Area Network (MS-CAN) Communication, Communication Can Be Intermittently Established
- Pinpoint Test U: No Medium Speed Controller Area Network (MS-CAN) Communication, All Modules Are Not Responding
- Pinpoint Test V: No Power To The Scan Tool
- Communications Network