Wheel And Tire System DTCS

TIRE PRESSURE MONITORING SYSTEM (TPMS) DIAGNOSTIC TROUBLE CODES (DTC) LIST

DTC	Description	Source	Action
B106A	Pressure Sensor Range Bit Incorrect State	Smart Junction Box (SJB)	Go to Pinpoint Test G .
B106B	Tire Pressure Sensor Low Battery	SJB	DTC B106B can be set during SJB configuration. Go to Pinpoint Test H .
B106D	Tire Pressure Monitoring System (TPMS) Initiators Not Configured	SJB	DTC B106D is only present when a new SJB is installed, the SJB is incorrectly flashed or the SJB is incorrectly configured. Successfully configuring the SJB is the only way to clear this DTC. VERIFY the SJB is correctly configured. If DTC B106D is still present, REFER to MODULE CONFIGURATION article.
B2477	Module Configuration Failure/Mismatch	SJB	DTC B2477 is only present when a new SJB is installed, the SJB is incorrectly flashed or the SJB is incorrectly configured. Successfully configuring the SJB is the only way to clear this DTC. MAKE SURE the SJB is configured correctly. If DTC B2477 is still present, REFER to MODULE CONFIGURATION article.
B2868	LF Tire Pressure Sensor Fault	SJB	DTC B2868 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
B2869	RF Tire Pressure Sensor Fault	SJB	DTC B2869 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
B2870	RR Tire Pressure Sensor Fault	SJB	DTC B2870 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
B2871	LR Tire Pressure Sensor Fault	SJB	DTC B2871 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
B2872	Tire Pressure Sensor Fault	SJB	NOTE: If the vehicle has been stationary for more than 30 minutes, the sensors will go into a "sleep mode" to conserve battery power. It will be necessary to wake them up so they will transmit the latest tire pressure information to the SJB. ACTIVATE the TPMS sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Activation . Go to Pinpoint Test F .
B287A	Tire Pressure System Fault	SJB	Go to Pinpoint Test F .
C2780	ECU in Manufacturing Mode	SJB	DTC C2780 is only present when a new SJB is installed, the SJB is flashed or the SJB is reconfigured. TRAIN the tire pressure sensors. REFER to Tire Pressure Monitoring System (TPMS) Sensor Training .
U0155	Lost Communication with Instrument Cluster	SJB	REFER to MODULE COMMUNICATIONS NETWORK article to diagnose the no communication problem.
All other SJB DTCs	-	SJB	REFER to the Master DTC Chart in MULTIFUNCTION ELECTRONIC MODULES article.