LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Focus S, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Forward Clutch >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Forward Clutch: Disassembly

  1. Remove the forward clutch pressure, friction and steel plates.
    1. Remove the retaining ring.
    2. Remove the plates.
    2. Fig 1: Identifying Retaining Ring And Plates
    GF0039842Courtesy of FORD MOTOR CO.
  2. Using the Spring Washer Compressor, install the forward clutch assembly in a suitable press.
    3. Fig 2: Identifying Spring Washer Compressor
    GF0039843Courtesy of FORD MOTOR CO.
  3. Using the Spring Washer Compressor, remove the forward clutch balance piston snap ring.
    4. Fig 3: Identifying Spring Washer Compressor
    GF0039844Courtesy of FORD MOTOR CO.
    NOTE: If damage to the forward clutch balance piston seals is found, install a new balance piston.
  4. Remove and inspect the forward clutch balance piston.
    5. Fig 4: Locating Clutch Balance Piston
    GF0039845Courtesy of FORD MOTOR CO.
  5. Remove the forward piston return spring.
    6. Fig 5: Locating Piston Return Spring
    GF0039846Courtesy of FORD MOTOR CO.
    NOTE: If damage is found to the forward clutch piston seals, install a new forward clutch piston.
  6. Remove the forward clutch piston assembly.
    7. Fig 6: Locating Clutch Piston Assembly
    GF0039847Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals