Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Air Cleaner (ACL) bolts | 9 | - | 80 |
| ACL clamps | 4 | - | 35 |
| Battery tray nuts | 12 | - | 106 |
| Center bearing cap locknuts | 25 | 18 | - |
| Converter housing-to-transaxle case bolts and stud | 22 | 16 | - |
| Electrical connector bracket nuts | 25 | 18 | - |
| Final drive input gear bearing retainer nut pre-torque | 400 | 295 | - |
| Final drive input gear bearing retainer nut rotational torque | 0.4-0.7 | - | 3.5-6.2 |
| Intermediate/Overdrive (O/D) band anchor bolt | 45 | 33 | - |
| Intermediate/O/D band servo cover boltsa | - | - | - |
| Intermediate shaft bearing cap locknuts | 25 | 18 | - |
| Line pressure tap plug | 13 | - | 115 |
| Main control valve body boltsa | - | - | - |
| Main control ground wire bolt | 10 | - | 89 |
| Manual control lever bolt | 30 | 22 | - |
| Output Shaft Speed (OSS) sensor bolt | 10 | - | 89 |
| Parking pawl assembly bolts | 13 | - | 115 |
| Pump bolts | 10 | - | 89 |
| Pump-to-case boltsa | - | - | - |
| Roll restrictor bolts | 70 | 52 | - |
| Selector lever cable bracket bolts | 25 | 18 | - |
| Solenoid bodya | - | - | - |
| Starter bolt | 35 | 26 | - |
| Starter bracket nut | 20 | - | 177 |
| Starter solenoid terminal nut | 5 | - | 44 |
| Starter studbolt | 35 | 26 | - |
| Starter terminal nut | 12 | - | 106 |
| Torque converter-to-flexplate nuts | 40 | 30 | - |
| Transaxle end cover bolts | 22 | 16 | - |
| Transaxle support insulator bracket nuts | 80 | 59 | - |
| Transaxle support insulator-to-body nuts | 48 | 35 | - |
| Transaxle support insulator-to-bracket nut | 150 | 111 | - |
| Transaxle-to-engine bolts | 47 | 35 | - |
| Transmission fluid filler tube bolts | 8 | - | 71 |
| Transmission fluid pan bolts | 10 | - | 89 |
| Transmission Range (TR) sensor bolts | 10 | - | 89 |
| Turbine Shaft Speed (TSS) sensor bolt | 10 | - | 89 |
a Refer to the appropriate procedure in this service information.