Pump Assembly: Assembly

NOTE: The smaller gear has a recess on both sides.

NOTE: The smaller recess must face away from the torque converter seal.

NOTE: The larger recess, with the beveled edge, must face toward the torque converter.

Fig 1: Locating Pump Gears

Courtesy of FORD MOTOR CO.

Using the Drive Pinion Oil Seal Installer, install the pump seal.
- Lubricate the gears and thrust washers with transmission fluid.

Fig 2: Identifying Special Tool

Courtesy of FORD MOTOR CO.

Install the top portion of the pump and install the pump bolts.
- Tighten to 10 Nm (89 lb-in).

Fig 3: Locating Pump Assembly Bolts

Courtesy of FORD MOTOR CO.