LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Focus SEL, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Servicing >> Transaxle Support Insulator >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Support Insulator: Removal

  1. Remove the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
  2. Remove the 3 battery tray nuts. Pull the battery tray up, disconnect the wiring harness fasteners from the battery tray and remove the battery tray.
    3. Fig 1: Identifying Battery Tray Nuts And Wiring Harness Fasteners
    GF0043336Courtesy of FORD MOTOR CO.
  3. Install the Engine Support Bar and Adapters and support the engine.
    4. Fig 2: Identifying Engine Support Bar And Adapters
    GF0039749Courtesy of FORD MOTOR CO.
  4. Remove the transaxle support bolt and nuts and remove the transaxle support insulator.
    5. Fig 3: Identifying Transaxle Support Insulator Bolt And Nuts
    GF0043337Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals