Powertrain Control Module (PCM): Installation

All vehicles 

1. Install the PCM and the 2 bolts.
   • Tighten to 8 Nm (71 lb-in).
2. Connect the 3 PCM electrical connectors.

PZEV 

3. Install the air cleaner outlet pipe and the intake air resonator. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING .

Non-PZEV 

4. Install the air cleaner outlet pipe and the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING .

All vehicles 

5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION .
6. Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) .