Section 1018 (Climate Control)
WARNING: This page is about a different car, the 2008 Mercury Milan, 2008 Lincoln MKZ, and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Removal And Installation
- Air Conditioning (A/C) Compressor - 2.3L
- Air Conditioning (A/C) Compressor - 3.0L, 3.5L
- Air Conditioning (A/C) Evaporator Discharge Air Temperature Sensor
- Air Conditioning (A/C) Pressure Relief Valve
- Ambient Air Temperature Sensor
- Blower Motor
- Blower Motor Resistor
- Blower Motor Speed Control
- Blower Motor Switch
- Clutch and Clutch Field Coil
- Compressor Manifold and Tube Assembly - 2.3L
- Compressor Manifold and Tube Assembly - 3.0L, 3.5L
- Condenser Core
- Evaporator Core
- Heater Core
- Heating Ventilation Air Conditioning (HVAC) Module
- Heater Core And Evaporator Core Housing
- In-Vehicle Temperature Sensor
- Mode Door Actuator - Air Inlet Door
- Mode Door Actuator - Defrost/Panel/Floor Door
- Receiver Drier Cartridge
- Register - Center, Fusion/Milan
- Register - Driver and Passenger Side, Fusion/Milan
- Register - MKZ
- Temperature Blend Door Actuator - LH
- Temperature Blend Door Actuator - RH, Dual-Zone EATC
- Thermostatic Expansion Valve
- Thermostatic Expansion Valve Manifold and Tube Assembly